Monday, February 16, 2009

[MW:1591] Re: Nominal Thickness

Hi Babu,
               Nominal thickness means pipe schedule thickess.
Example pipe size 6" sch 40, A 106 Gr B , in this case sch 40 (7.11mm) is nominal thickness.
Actual thickness means measured thickness but this measured thk should be with in tolerance as per applicable code.
 
Louis
Toyo Engg - Singapore

--- On Sat, 14/2/09, babu k <kbabupsg@gmail.com> wrote:
From: babu k <kbabupsg@gmail.com>
Subject: [MW:1582] Nominal Thickness
To: materials-welding@googlegroups.com
Date: Saturday, 14 February, 2009, 9:49 PM

By -

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

[MW:35614] Re: SS FILLER

dear , pl check A number and Gas composition use for ss cant be sutibale same % for duplex., u need to qualified with aditional testing of f...

  • Materails FAQs
    Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
  • RE: [MW:5585] Buttering of weld joints
    Definition of buttering from ASME Section IX, QW/QB-492 Definitions:   Buttering:  the addition of material, by welding, on one or bot...
  • WELD AND WELDING SYMBOLS
    Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...