[MW:1567] RE: 1565] A good suggestion from a member

Dear all members,

 

Definitely I agree with Mr. Bose and Mr. Raghuram as you all will agree that this group has grown beyond expectations and performing exceptionallly well as judged by very high and prompt flow of emails. I have seen many of the groups that have last e-mails posted in year 2005 or 2006. I am quite impressed of the enthusiasm and eagerness of the participants, probably because we are all like minded and understand each other very well in few words.

 

Having said that it is imperative to have accuracy and focus on our word power. More precise answer avoids at minimum, two communications ie. re-question and re-answer. For example, quoting ASME B 31.3 alone and quoting ASME B 31.3 para 323.2.1 (e) has great influence on readers and participants. Imagine 400 members reading two extra emails and spent atleast 3 minutes on each! Also few people like me have habbit of book marking (flag) incomplete answers and keep it in Inbox awaiting final answer and thereby leaving Inbox occupied.

 

As far as personal feeling like “I think……”, “May be……”, “I/we have done……” etc. are concerned, I do not see great problem here as memebers have different level of experience and therefore can not generalise their own statement. More experienced people can definitely put up authentic and strong opinions. As idea of this group is to encourage and mentor younger and less experienced community to allow them stand globally, we should be reasonably tolerant to this.

 

 

Thanks,

 

Regards,

 

Jatin Patel

Worley Parsons, London, Piping Materials

 

---

From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Bathula Raghuram (Mumbai - PIPING)
Sent: 12 February 2009 10:55
To: materials-welding@googlegroups.com
Subject: [MW:1565] A good suggestion from a member

 

More suggestions are welcome to improve the quality of postings.

Always read/review your posting before hitting the send button.

---

From: Bose Rituraj (LD5 Site)
Sent: Thursday, February 12, 2009 4:21 PM
To: Bathula Raghuram (Mumbai - PIPING)
Subject: Related to materials and welding group

 

Dear Raghuram,

 

Thanks that Materials and Welding are going well! I have to comments, where you can help to direct the members.

 

1. Though you have tried, but still people are replying in such a way that we have to unnecessary scroll down a lot. Some time it is boring to read same thing again and again.
2. Some replies are not proper with author’s personal feeling like “I think……”, “May be……”, “I/we have done……” etc. Please instruct the members to be specific and must be related to standards or codes. Even some members are referring some codes without reading it and obviously the specific clause is missing in their mails.

 

Thanks and regards,

 

R. Bose

*** WORLEYPARSONS GROUP NOTICE *** "This email is confidential.  If you are not the intended recipient, you must not disclose  or  use the  information contained in it.  If you have received this email in error,  please notify us immediately by return email and delete the email and any attachments. Any personal views or opinions expressed by the writer may not necessarily reflect the views or opinions of any company in the WorleyParsons Group of Companies." 

--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---