Re: [MW:30817] Fwd: SS to SS welding

Ccan U be a bit specific .  Type /  grade / MOC i.e  SS 304 , 316 , 321 etc .  I assume its a plate material of say say ASTM-A-240 .

On Sat, 25 Apr 2020 at 09:31, Saji Jos <sajijosp@gmail.com> wrote:

---------- Forwarded message ---------
From: Saji Jos <sajijosp@gmail.com>
Date: Fri, Apr 24, 2020, 3:21 PM
Subject: Fwd: SS to SS welding
To: <materials-welding@googlegroup.com>

Dear experts, 

Please advise the suitable filler wire to weld between SS to SS without purging.structural work. 

With regards. 

Saji Jos Purathoor. 

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAKZDJ1eUB_%2BqE9NENL067b_7u9Eu5_Be-1syzeSuAndOY7zJpg%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CA%2BQ29OiSiuOGBYSp3%2BvrgjZhnezbrpd0FDTvXhwBaH0ED0A3yw%40mail.gmail.com.