Re: [MW:30759] Pickling and passivation

Please check for your project Piping/Welding Specification/standards/fabrication procedure of inconel Piping.
If not found, check with manufacturer recommendation and get it approved by client.

On Apr 15, 2020 10:30 AM, "Chiranjeevi A" <chiranjeevipuvvula@gmail.com> wrote:

Dear all,

  Can any one suggest the specification or standard procedure s to be followed for pickling and passivation of inconel pipes and flange surfaces

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAN4%2Bm0xJKPZj%2Bf35s8imSXNUXKDy%3DEKgyqDtZadtu62dHMgHmw%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CANiuf9cpwhgmqoRcEu4vrn-BDKLMNtRiCB2_3WB6vrNufXHLWg%40mail.gmail.com.