Tuesday, April 28, 2020

Re: [MW:30824] Tube to Tube sheet welding, Orbital welding parameters for header box

David thank you for your reply. Can you tell me the reasoning behind slower weld speed.

On Thursday, April 9, 2020 at 5:31:09 AM UTC-5, d...@btinternet.com wrote:


Try a slower welding speed and a closer arc length.

Regards, 9 4 2020.

David Harvey

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/ef1ee33e-99ba-43ce-a8c2-978055638d57%40googlegroups.com.

No comments:

[MW:35614] Re: SS FILLER

dear , pl check A number and Gas composition use for ss cant be sutibale same % for duplex., u need to qualified with aditional testing of f...