Hi
Have good day... For this issue you have to ask your pipeline's end user and the existing pipeline user.
From: materials-welding@googlegroups.com <materials-welding@googlegroups.com> on behalf of QA/QC <adnanziad49@gmail.com>
Sent: Saturday, April 18, 2020 11:59:56 AM
To: Materials & Welding <materials-welding@googlegroups.com>
Subject: [MW:30784] two Pipeline crossing
Sent: Saturday, April 18, 2020 11:59:56 AM
To: Materials & Welding <materials-welding@googlegroups.com>
Subject: [MW:30784] two Pipeline crossing
Hello everyone
-- durring welding of new pipeline 12'' we found that we are cross a pipeline in service what is the correct procedure to do
- we will cross our pipeline from the top or we should make it down the existing pipeline in service
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/63b2d348-24e2-4e07-a9aa-16928e9048b3%40googlegroups.com.
No comments:
Post a Comment