Saturday, April 11, 2020

Re: [MW:30730] Tube to Tube sheet welding, Orbital welding parameters for header box

Yes. I agree kindly check CE .

On Thu, 9 Apr 2020 at 16:35, 'james gerald' via Materials & Welding <materials-welding@googlegroups.com> wrote:
Problems related to Hardness may be due to High Heat Input or preheat being applied not properly (temperature is OK) you may look at the option of reducing the cooling rate or checking at the Carbon Equivalent

Thanks & Regards

J.Gerald Jayakumar




On Thursday, April 9, 2020, 05:31:05 PM GMT+7, 'dwh@btinternet.com' via Materials & Welding <materials-welding@googlegroups.com> wrote:



Try a slower welding speed and a closer arc length.

Regards, 9 4 2020.

David Harvey

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/materials-welding/3277447a.10ad.1715e7c63d8.Webtop.227%40btinternet.com
.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/1877339917.2035801.1586429580458%40mail.yahoo.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CA%2BQ29OirWCm%2B%2BRGkvJ0sAsQH2J2YXO4AX8Ua3vPvgd%2Bx3i8D8Q%40mail.gmail.com.

No comments:

Re: [MW:35289] Welding consumable for S355J2WP material

S355 J2 WP  is a weathering structural steel  It has better atmospheric corrosion resistance. Use E 8018 - W1/W2  Electrodes This is regular...