Re: [MW:30804] WPS compatibility for A36 and S275JR?

Make one pre-qualified wps, that all

On Sat 18 Apr, 2020, 5:02 PM chris, <chrissabu28@gmail.com> wrote:

hello friends,

I have a WPS with ref code AWS D 1.1 for A36 can I use the same for welding S275JR as well? 

I would like to know if there is any code prohibition for this? Even though the materials are almost the same except for a higher yield strength for S275.

Best regards

Chris

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/3a35de5b-edc0-4d7a-a713-ba7e405c7572%40googlegroups.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAKBH9tP3YGjXX3P6K1eQc8zCw1BeEDzhHs_vSNKSx_%2B%3DUgf2dw%40mail.gmail.com.