Re: [MW:30716] BASE METAL THIKNESS FOR PQR

according to ASME or API104?

Στις Τετ, 8 Απρ 2020 στις 11:10 π.μ., ο/η QA/QC <adnanziad49@gmail.com> έγραψε:

Hello 

i want to prepare a WPS for pipeline work with base metal API 5L X60 - X65  SMAW 

for the test coupon i want to use 6" with thickness = 7.92 mm 

want to know the minimum and maximum range for size and thickness used for the PQR 

BEST REGARDS

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/0230b3b5-7871-4efa-94d7-609f4effa70a%40googlegroups.com.

--

Dr. Georgios Dilintas,

Dipl. Ing. In Aeronautic and Space Engineering

Ph.D in Mechanics of Solids - Computational Mechanics

A.I.S, A.N.I, IRCA Lead Auditor

Welding, Stress Analysis, Corrosion, QA/QC, Failure Analysis, Risk Analysis

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAPOi40Dpd_yG_2GUgvUwvCGAAHdp2g8nx-ZzNokxYdiy9wgMgA%40mail.gmail.com.