Dear sir.
E112 requirement less than 7 is coarser.
Regards
Dinesh
On Feb 10, 2019 4:33 PM, "Jay Poojary" <jayogini@gmail.com> wrote:
-- --Lower grain size (e.g. 6, 5, 4 and so on) are coarserThanks & Regards,Jay PoojaryOn Sun, Feb 10, 2019, 4:22 PM sandeep kumar <sandeepdhiman63@gmail.com wrote:Dear all--Please advise your views on below query:ASTM A182 10.1.2 Grades F 321H, F 347H, and F 348H shall have agrain size of ASTM No. 7 or coarser.What does it stand for coarser?Does it mean a higher ASTM grain size no (e.g. 8, 9 and so on) or lower ASTM grain size no. (e.g. 6, 5, 4 and so on)?Thanks & regardsSandeep
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com .
Visit this group at https://groups.google.com/group/materials-welding .
For more options, visit https://groups.google.com/d/optout .
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com .
Visit this group at https://groups.google.com/group/materials-welding .
For more options, visit https://groups.google.com/d/optout .
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment