[MW:29103] Re: WPS

Hi Merghni

Before you open your WPS for review,

First list out the essential variables which are applicable for your parts e.g. minimum and maximum plate thickness, material grouping, welding process, PWHT requirements, impact testing, hardness. List them all.

Second, now just see the WPS are covering those ranges or not. Apart from that read drawing, there may be any specific code or service requirements laid down for welding which has also to be complied.

Hope it will guide you.

Thanks & regards

Sandeep Kumar

On Tuesday, February 5, 2019 at 4:18:17 PM UTC+3, merghni wrote:

Dear sir;

i need advice how to review any  WPS , I mean what the steps for check the WPS is it right or wrong, because Am not good familiar in welding I know how to use the codes like ASME,API 1104 and AWS.

NDT Inspector

thanks

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.