Yes, it is not necessary to bake it but to be kept in Quiver at 120°c. It is rutile based flux which is having >15<30ppm hydrogen level, to be kept as it.
On 28-Nov-2017 5:37 pm, "Souravbohray" <ermechsouravbohray@gmail.com> wrote:
one of inspector tell me its not neccesary to backing of 6013 but its packing condition, physical condition must be observed before use.
Dust and material condition may be problem.
grade of material and bcause its for low grade material purpose for welding..afford for tack weld in uppergrade ,7018 is better option for tack also in uppergrade
--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com .
Visit this group at https://groups.google.com/group/materials-welding .
For more options, visit https://groups.google.com/d/optout .
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment