Mr. Dominic,
Thanks for your feedback.I will add your suggestion on next revision.
On 19-Nov-2017 4:36 PM, "Dominic v.k.dominic" <v.k.dominic@gmail.com> wrote:
Dear Pradip,Thank you for the excel table and your time.Please note that API-1104 Some of defect/flaw contractors will accepted reference of your table.The API-1104 code allowed the range of below defects/flaws,Lack of fusion - up to 25mm in (300 mm) length of weld.Lack of penetration - up to 25mm (300 mm) length of weld.Undercut - up to 50mm (300 mm) length of weld.Kindly refer the code and please take your account in next version.Thanks,Best Regards,Dominic V.K.
On 19 November 2017 at 11:17, Engineer Inam-Ul-Haq <engrhaq673@hotmail.com> wrote:Very Nice, Mr. Pradeep Ghosh
From: materials-welding@googlegroups.com <materials-welding@googlegroups.com > on behalf of Pradip Ghosh <pradipg2@gmail.com>
Sent: Sunday, November 19, 2017 11:59 AM
To: materials-welding@googlegroups.com
Subject: Re: [MW:27011] Re: Radiography acceptance criteria.Dear ,Shashank C Vagal use bellow link to download the file.
https://drive.google.com/open?
id=0ByvRBXye0uymdW9aekp1M0J1cH c
--
On Fri, Nov 17, 2017 at 11:49 AM, 'Shashank Vagal' via Materials & Welding <materials-welding@googlegroups.com > wrote:
Dear Pradeep Ghosh,Please fwd to me a copy of this excel program .Thankfully Yours,
Shashank C Vagal301, PRATHAMESH, M G Rd – Mahant Rd, Vile Parle East, Mumbai 400 057 INDIATel : +91 22 2611 6640 / (+91) 9821386292 / 8082395502
On Friday, 17 November 2017 9:15 AM, SULTAN <sultanhyder0@gmail.com> wrote:
Very Nice effort Mr.Goshi--i think one thing is missing in this is ASME Sec.I
Thanks,
Regard'sSultanQC EngineerMEC Engineering
On Thursday, September 5, 2013 at 3:18:52 PM UTC+5, Pradip Ghosh wrote:Dear All,
I have prepared a excel program in which you can find Radiography acceptance criteria of ASME Sec IX,API-650,API-1104,ANSI B 31.3 and ASME Sec VII Div in a click.Please give me your review and comments.
Pradip Ghosh
QA/QC EngineerMott MacDonald (P) Ltd.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com .
Visit this group at https://groups.google.com/group/materials-welding .
For more options, visit https://groups.google.com/d/optout .
--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to a topic in the Google Groups "Materials & Welding" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/materials-welding/k5wvDu0g .8dU/unsubscribe
To unsubscribe from this group and all its topics, send an email to materials-welding+unsubscribe@googlegroups.com .
Visit this group at https://groups.google.com/group/materials-welding .
For more options, visit https://groups.google.com/d/optout .
--
Thanks and Regards,Pradip Ghosh
QA/QC EngineerMott MacDonald (P) Ltd
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com .
Visit this group at https://groups.google.com/group/materials-welding .
For more options, visit https://groups.google.com/d/optout .
--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com .
Visit this group at https://groups.google.com/group/materials-welding .
For more options, visit https://groups.google.com/d/optout .
--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to a topic in the Google Groups "Materials & Welding" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/materials-welding/ .k5wvDu0g8dU/unsubscribe
To unsubscribe from this group and all its topics, send an email to materials-welding+unsubscribe@googlegroups.com .
Visit this group at https://groups.google.com/group/materials-welding .
For more options, visit https://groups.google.com/d/optout .
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment