Wednesday, November 22, 2017

[MW:27036] Welding after PWHT on SA335 P11 coil

Dears,


We have ordered fired heater in which coil material is SA335 P11. Coil size is 6" x SCH 40 (i.e. 6.625" OD x 0.28" THK). These coils are PWHT'd. Issue is, our vendor forgot to weld the thermocouple RF pads on the coil before PWHT. What needs to be done further if we weld the RF Pads on the already PWHT'd coils? Do we need to do PWHT again for that particular joint?


Please let us know your opinions.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

No comments:

[MW:35763] Hardness range for CS+ Alloy0625 clad welding

Dear experts. I am currently in the process of qualifying a PQR for API 5L X65 + A350 LF6. Both material consists of a base metal with alloy...