Monday, November 20, 2017

Re: [MW:27016] WPS REG

Hi,

The groove thickness to be considered ie 14.27 mm.

Thanks & Regards
Muhammed Ibrahim PK

On 18 November 2017 at 12:02, Subrata Das <subrata19732111@gmail.com> wrote:
Dear Experts,
Please guide me for test coupon thickness to be considered for below case

- Vessel thickness 14.27mm
- Nozzle thickness 40mm
- Set in type Nozzle on Vessel shell
- Full penetration weld with fillet
- Impact test applicable
- No PWHT

Do I need to consider Nozzle thickness 40mm or Shell thickness 14.27mm. Appreciate your reply in advance with Code clauses.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.


Virus-free. www.avast.com

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

No comments:

Re: [MW:35289] Welding consumable for S355J2WP material

S355 J2 WP  is a weathering structural steel  It has better atmospheric corrosion resistance. Use E 8018 - W1/W2  Electrodes This is regular...