The welder could weld a maximum of 2 times the thickness of weldmetal depositted for individual process.
For example the thickness of plate is 20mm . 1. GTAW 3×2=6mm
2. SMAW 5×2=10mm
3. SAW 12×2= 24mm
Total thickness=20mm & 40mm
Thanking You.
With Warm Regards,
Muthu Barathi P. Mobile : +918469593553
Sent from RediffmailNG on Android From: Sivapraveen <sivapraveen@gmail.com> Sent: Wed, 8 Nov 2017 08:11:56 GMT+0530 To: Materials & Welding <materials-welding@googlegroups.com> Subject: [MW:26970] WQT practical scenario question Suppose one welder is welding the material... First 2 layer is welded by gtaw.next two layer is welded by smaw.next one layer is welded by saw...process wise how much thickness he can weld? -- https://materials-welding.blogspot.com/ https://www.linkedin.com/groups/122787 --- You received this message because you are subscribed to the Google Groups "Materials & Welding" group. To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com. Visit this group at https:roups.google.com/group/materials-welding. For more options, visit https:roups.google.com/d/optout.
--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment