Please refer to the below snap shot of ASME Sec.IX.
In case if you have used a combination of Welding process during PQR, below section also will be useful.
Thanks & Regards
J.Gerald Jayakumar
0091-9344954677
On Saturday, November 18, 2017, 1:42:27 PM GMT+4, Kannayeram Gnanapandithan <kgpandithan@gmail.com> wrote:
thickness should cover both
THANKS & BEST REGARDS,
KG.PANDITHAN, IWE, AWS-CWI, CSWIP 3.1,
CONSULTANT-WELDING & QUALITY
Mobile no: +919940739349
On Sat, Nov 18, 2017 at 2:32 PM, Subrata Das <subrata19732111@gmail.com> wrote:
This message is eligible for Automatic Cleanup! (subrata19732111@gmail.com) Add cleanup rule | More info
Dear Experts,
Please guide me for test coupon thickness to be considered for below case
- Vessel thickness 14.27mm
- Nozzle thickness 40mm
- Set in type Nozzle on Vessel shell
- Full penetration weld with fillet
- Impact test applicable
- No PWHT
Do I need to consider Nozzle thickness 40mm or Shell thickness 14.27mm. Appreciate your reply in advance with Code clauses.
--
https://materials-welding. blogspot.com/
https://www.linkedin.com/ groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@ googlegroups.com.
Visit this group at https://groups.google.com/ group/materials-welding.
For more options, visit https://groups.google.com/d/ optout.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment