Normally for CO2 shielding gas for FCAW welding, a Heater can be fitted to the Gas cyclinder along with the Regulator and Flow meter.
Argon used in purging gas shouldn't be a problem as the gas will be heated up due to welding Heat.
I haven't comes across Hydrogen problems in GTAW welding.
Thanks & Regards
J.Gerald Jayakumar
0091-9344954677
On Monday, November 20, 2017, 11:29:48 AM GMT+4, Mohamed Ali <marb8389@gmail.com> wrote:
Dear Experts,
-- Could you please tell, how can ensure no hydrogen is is the backing or Shielding gas??
if use Argon gas 99.997% during welding.
Regards,
Mohamed
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment