Re: [MW:22773] GTAW + SMAW

Hi jay ,

Refer ASME Sec IX QW- 202.2 (C) , ofcourse you have to write a WPS Separately for SMAW for Fillet Welds, with the same PQR No.

Regards ,

Saravanan.

On Wed, Jan 28, 2015 at 6:44 PM, <george.dilintas@gr.bureauveritas.com> wrote:

normally yes

best regards

Dr. Georgios Dilintas

Authorized Nuclear Inspector
Authorized Inspector Supervisor

I&F REGIONAL TECHNICAL MANAGER
BUREAU VERITAS PIRAEUS - GREECE

Tel: +30 210 40 63 113 /4 /5
Fax: +30 210 40 63 118
Cell: +30 69 44 64 62 04
This message contains confidential information. To know more, please click on the following link: http://disclaimer.bureauveritas.com

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/OFD9E73B50.6D276E6A-ONC2257DDB.00357CFF-C2257DDB.00358189%40LocalDomain.

For more options, visit https://groups.google.com/d/optout.

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CALV1rkKA7CnJd_q4LCdmhB9P2eQLcPTTRXh%3DcnbVEdymkEsStQ%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.