ASME SEC IX will tell only PT and Maco Examination is to be done, If you have as per ASME SEC IX than it's not required. Client spec. will speak about (Pull out, Tear Test etc.) these test, Pls check if you have any client specification applicable.
Thanks & Regards,
Mohd. Azam
On Mon, Jan 12, 2015 at 8:55 AM, silambarasan veluchamy <chimbu.shawn@gmail.com> wrote:
Dear members,--We are going to carry out a Mockup Procedure qualification for T-TS joint as per ASME SecIX. what are the test required to carry for the qualification. I hear from a TPI that RT, Tear test & pull out has to be carried out, whereas ASME Sec IX & Tema class 'R' are not talking about the above said tests.Is the above said tests required? If so, the as per which standard?Kindly adviceBR,M.V.Silambarasan
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/eb910586-77a2-4489-a880-880f18dbb748%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CABD%2BRXRGYPHSaj9Y_n3WQaXAd5XhGy%2BDdZ1EEzx0PU0CmjiCOA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment