Re: [MW:22726] Thin material welding

In principle Possible. U can use pulsed TIG welding process with  same type

filler wire and  a lower size.

But u have not mentioned the type of defect in the weld for better guidance.

 

C Sridhar.

Please don't print this e-mail unless you really need to. Save the environment.

---

 

---

From: 'Neilashkumar' via Materials & Welding <materials-welding@googlegroups.com>
To: "materials-welding@googlegroups.com" <materials-welding@googlegroups.com>
Sent: Tuesday, 13 January 2015 11:44 PM
Subject: [MW:22721] Thin material welding

  Dear all,

We have a project for Seam Welding repairing work of Stainless steel

round duct piping for rubber finish building,details are as follows,

Total repairing welding length-500-550meter

Pipe material.    --EFW304/304LSS A240

Pipe thickness --below 3mm

Pipe size --0.75" -20"dia

Can you please tell me whether it is possible to do repair welding ? Method

to do repair weld.

P.NEILASHKUMAR

Sent from my iPad

MOB : 966 533098265

           91+9952110791

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/C90FF222-A0AB-466C-8E5C-313F24AFEBF2%40yahoo.com.

For more options, visit https://groups.google.com/d/optout.