[MW:22777] Re: Structural WPS as per IS 7307

You have to prepare two WPS for thicknesss of 10 mm and 20 mm. it will be ccover your required thickness range. 

Position can be taken depend upon mfg. or drawing requirement.

On Thursday, 29 January 2015 15:35:30 UTC+5:30, Akshith wrote:

Dear Experts,

Kindly suggest for preparation of structural WPS as per IS 7307, my structural steel thickness range is 4.7mm to 40 mm.

Please suggest thickness range and positions are to be qualified as per IS 7307 & IS 7310.

Regards,

Akshith.

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/9b5d3019-d181-4ed7-b468-c3e3574fb985%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.