Using AWS code NO. Using ASME yes you have to write a new WPS for single process.
Sent from Samsung Mobile
-------- Original message --------
From: Jay Poojary <jayogini@gmail.com>
Date:28/01/2015 17:05 (GMT+08:00)
To: materials-welding@googlegroups.com
Cc:
Subject: [MW:22769] GTAW + SMAW
Dear Experts,
-- Please clarify. If I have qualified a procedure with combination process i.e GTAW+SMAW for groove joint, then using this procedure can I allow to weld fillet joints using SMAW.
cordially,
Jay Poojary
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAAcO%3DyToxo3L--R8LjJ4aFCc2zrx8Yvo%2BE%2BMPFwzw%3DW8JLhZwQ%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment