sir,
thanks a lot for your guidance.
but i m worried if the crack gets developed during the forming as material is very hard.
then in that case heat treatment is of hardly any use.precisely i want to know during forming at what stage intermediate heat treatment should be carried out.
or we should continuously check hardness during forming & if hardness gets increased above particular value say value of hardness which was before forming & then carry out stress releiving.Is this appriach ok?
Kindly let me have your valued opinion.
On Jan 2, 2015 6:19 PM, "pgoswami" <pgoswami@quickclic.net> wrote:
-- You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAGMn-yxfdFNWF6LVKF1QD_gJ7Ef%3DFLtNwELhCot3xrVdUpJSqw%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
Comments