As far as my experience is concerned every process drain and vent needs to be included in P&ID, but same is not necessary for hydrostatic drain and vents.
Ammar
On Thu, Oct 18, 2012 at 2:18 PM, VENKATA SWAMI REDDY Karri <kvsreddy777@gmail.com> wrote:
process vent and drains only required to show in p&id.--
On Tue, Oct 16, 2012 at 2:57 PM, mahendra reddy <mahendra.mog@gmail.com> wrote:
Dear
Hydrotest vents and drains not required to show in p&id. Refer project engineering spec
On Oct 16, 2012 8:50 AM, "Zakaria ghrab" <zakaria.ghrab@gmail.com> wrote:--
Dear experts,--
Construction code : ASME B31.1
We have some vent and drain valves / lines no mention in P&ID, when request our client to make update ther said that it's not principal lines so no need to mention every vent/drain.
In my experience, we need an update P&ID for preparing hydrotest layout and to make final handover wolkdown but i didn't get any support from codes / standards.
Could you help me please.
Regards.
--
زكرياء غراب
GHRAB Zakaria
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
Best Regards,
K.V.S.Reddy,
Q.C.Inspector(Piping&Welding),
BS-171 Project,
SAIPEM,
Kuwait.
kvsreddy777@gmail.com,karryswamireddy@yahoo.com,
Ph:00965-94414396.PleaseSave a tree. Don't print this e-mail unless it's really necessary
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment