Re: [MW:15744] Minimum spots of hardness in a pipe weld.

Bs 1043-1 is superseded.replaced by Bs en ISO 9015-1
Sent from my BlackBerry® smartphone from du

-----Original Message-----
From: HAREESH K V <hareesh13h@gmail.com>
Sender: materials-welding@googlegroups.com
Date: Mon, 22 Oct 2012 16:22:47
To: <materials-welding@googlegroups.com>
Reply-To: materials-welding@googlegroups.com
Subject: Re: [MW:15738] Minimum spots of hardness in a pipe weld.

Dear Mr.Tomy George.

Thank you for your reply. I need some more clarifications also.

In BS 1043-1, it is mentioned about transverse sections of arc welded
joints. What i need is about hardness testing in as welded condition
in plants/construction sites.

Some of my clients are asking to take 2 or 3 readings, and average of
the same is recorded (in this case we have to take 2 or 3 readings in
each, ie, Weld, haz and parent metal) . We have not find a code
requirement for the same. Also it costs us a lot of time also.

Thanking You,

Hareesh K V


On Sat, Oct 20, 2012 at 4:50 PM, tomy george <tomychalil1967@gmail.com> wrote:
> Hi
>
> Minimum number of spots 3, One each from weld, HAZ and base metal. More
> details available in BS 1043-1.
>
> Regards,
> Tomy George
>
> On Sat, Oct 20, 2012 at 10:27 AM, HAREESH K V <hareesh13h@gmail.com> wrote:
>>
>> Dear Sir's,
>>
>> What is the minimum number of spots to be taken for hardness in a pipe
>> weld. Some clients are specifying to take 3 or 4 spots and take the
>> average. Any code references. My construction code is ASME B31.3. But
>> if it there in any other construction code also, it will be helpfull
>> for me.
>>
>> Please share your experience.
>>
>> Thanking You,
>>
>> ----------------------
>> Hareesh K V
>> +91-9447625012
>>
>> --
>> To post to this group, send email to materials-welding@googlegroups.com
>> To unsubscribe from this group, send email to
>> materials-welding+unsubscribe@googlegroups.com
>> For more options, visit this group's bolg at
>> http://materials-welding.blogspot.com/
>>
>> http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
>>
>> The views expressed/exchnaged in this group are members personel views and
>> meant for educational purposes only, Users must take their own decisions
>> w.r.t. applicable code/standard/contract documents.
>>
>>
>
> --
> To post to this group, send email to materials-welding@googlegroups.com
> To unsubscribe from this group, send email to
> materials-welding+unsubscribe@googlegroups.com
> For more options, visit this group's bolg at
> http://materials-welding.blogspot.com/
> http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
>
> The views expressed/exchnaged in this group are members personel views and
> meant for educational purposes only, Users must take their own decisions
> w.r.t. applicable code/standard/contract documents.
>
>



--
----------------------
Hareesh K V
+91-9447625012

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm

The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.


--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm

The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.