Fwd: Re: [MW:15716] Using of higher schedule pipe in place of actual.

Yes u can use higher sch. & chmfer it to match the ID of both pipe and flange and it and it is very much acceptable as per code and also according to general engineering practice....

Cheers !!!

Syed kashif

QA /QC Engineer

Sent from Samsung mobile

-------- Original message -------- Subject: Re: [MW:15702] Using of higher schedule pipe in place of actual. From: Parag Pansare To: materials-welding@googlegroups.com CC:

YES U CAN USE PROVIDED IT IS NOT A PIGGABLE LINES.
PARAG

On Oct 8, 2012 9:02 PM, "Biplab Pal" <biplab.mech@googlemail.com> wrote:

Dear Experts,

 

Our Construction code is ASME B31.3, 2010. My contractor is using Fitting of 24 inch sh.60(24.61 thk) in place of 24 inch sh.40 (17.48 thk), one end with Pipe and another with flange all are same dia with same sh. Contractor is following the chamfering technique as per B 31.3.

Is it acceptable?

There is nothing mensioned in client std. about it.

Please guide me with references. ARAMCO references will be preferable.

--

Thanks & Regards
Biplab Pal
Welding Inspector

E-mail:   biplab.mech@gmail.com
 
Information in this email and any attachments is confidential and intended solely for the use of the individual(s) to whom it is addressed or otherwise directed. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of the Company. Finally, the recipient should check this email and any attachments for the presence of viruses. Myself accepts no liability for any damage caused by any virus transmitted by this email.
 

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
 
 

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.