Is frame intended for cold service? What is minimum temp frame will be utilized?
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of pradeep kumar
Sent: Friday, October 26, 2012 1:39 AM
To: materials-welding@googlegroups.com
Subject: [MW:15779] travel speed and Heat input
Hi all,
We have a PQR qualified without impact test (as per AWS D1.1). Our project requirement says "Travel speed and Heat input shall be recored during procedure test". Does this says impact test is mandatory?
TPI told me to keep t/s and Heat input columns blank in WPS from that PQR -otherwise it means impact is mandatory.
Please help - how can I know if impact is mandatory or not if not mentioned in Construction code.
PS: WPS is for structural frames.
Thanks in advance
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
************************************************************************************** The contents of this e-mail message and any attachments are confidential and are intended solely for the addressee. If you have received this transmission in error, please immediately notify the sender by return e-mail and delete this message and its attachments. Any unauthorized use, copying or dissemination of this transmission is prohibited. Neither the confidentiality nor the integrity of this message can be vouched for following transmission on the Internet. **************************************************************************************
No comments:
Post a Comment