Thank u for your reply,can you please let me know according to which standard is this calculation
Regards
kishore
On Mon, Oct 22, 2012 at 10:47 PM, c sridhar <sridhar305@yahoo.com> wrote:
Mr. Kishore,Please suggest with proper standards calculation for fillet leg length and throat thickness calculationWith reference to above the calculations as follows:1. Fillet leg length ' L' - 0.75 times of Base Metal Thickness (for load bearing structures)2. Fillet leg length ' L' - 0.38 times of Base Metal Thickness (for non load bearing structures)3. Throat thickness ' t' - 0.71 times Leg length.' L'Hope it will be of use to U.Sridhar.----------------------------------------------------------------------------------------------------------------------------------------------------------------
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment