Dear Experts,
We are going to fabricate carbon steel to carbon steel pipe ( A-106 To
A 106 Gr. B/ A-105/ A234 GR. B ) with NACE Specification as per MR-175
without POST WELD HEAT TREATMENT.
In this case how much is maximum limit of hardness in BASE METAL/HAZ &
WELD MENT & where it is specified.
Can we use normal ER-70S2 filler wire & E-7018 Electrode ( Without
HICC & SSIC Certificate )
Regards
Pradip
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
Subscribe to:
Post Comments (Atom)
-
Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
-
Definition of buttering from ASME Section IX, QW/QB-492 Definitions: Buttering: the addition of material, by welding, on one or bot...
-
Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...
No comments:
Post a Comment