You can find out the details on Table K323.3.1 Impact Testing Requirements. (ASME B 31.3, 2006 Edition).
Attached copy too.
Regards,
Tomy George
On Mon, Oct 15, 2012 at 5:34 PM, vempati anjaneyulu <v.anjaneya@gmail.com> wrote:
Dear Experts,
This is regarding location of impact test specimens to be taken from
14" x 80mm thick fitting material to test at -50deg.c for materail
qualification at vendor shop.
the applicable codes and material standards are:
1) ASTM A420 WPL6 (fitting made from A333 Gr.6 pipe)
2) A 370 for mechanical tetsing
3) ASME B31.3 Section IX for high pressure piping.
please let me know where (at what thickness level)the impact test
coupons are to be taken to qualify the fitting material.
regards
Anjan
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment