You can use the WPS if chemical composition is within range, remember that a WPS is valid for all materials of same P No.
I have used the same to successful results in a project. If you want you can get the same WPS validated by EN material PQR as an extra point for satisfaction.
Ammar Shaikh
Ammar Shaikh
On Thu, Jul 26, 2012 at 4:44 PM, c sridhar <sridhar305@yahoo.com> wrote:
yes, U can use any ASME, IS, EN or any group if P nos and Group nos matches in all respects.sridhar.
From: Vinayak Kale <Vinayak_Kale@Lntenc.com>
To: materials-welding@googlegroups.com
Sent: Thursday, 26 July 2012 8:36 AM
Subject: Re: [MW:14960] Need WPS clarification with ASME and EN
Can , provided , all essential parameters & properties shall match
Regards
Vinayak Kale
OGSP - QA & I , HC - Upstream
EPC Block , 2nd Floor , Gate No.1
Saki Vihar Rd. Powai Campus
Mumbai - 400072
Ph : + 91 022 6705 3969
(M) - 9987875309
www.larsen toubro.com
[MW:14959] Need WPS clarification with ASME and EN
Naresh Kumar to: materials-welding@googlegroups.com
Sent by: materials-welding@googlegroups.com
![]()
From: Naresh Kumar <snareshkumar30@yahoo.com> To: "materials-welding@googlegroups.com" <materials-welding@googlegroups.com> Sent by: materials-welding@googlegroups.com Please respond to materials-welding@googlegroups.com
Dear experts,
I have a doubt about WPS. Our company has WPS with ASTM material by ASME standard.
Whether this WPS can be used for the equivalent BS material or not.
Thanks & Regards,
Kumar S----
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
Disclaimer :This email and any files transmitted with it are intended solely for the use of the addressee(s) only and may contain confidential and/or privileged information. If you are not the addressee, then this message is not intended for you and be advised that you have received this email in error and that any use , dissemination , forwarding, printing or copying of this email is strictly prohibited. In such case please notify the sender and delete this email and any attachments with it from your system immediately.Receipt of this email by you shall not give rise to any liability on the part of Larsen & Toubro Limited
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment