Wednesday, July 25, 2012

[MW:14953] One WPS with Combinaion of PQR

Good Morning Experts

I have doubt regarding combination of PQR with one wps

1.I have WPS01 for GTAW material P1 (no PWHT & impact) base metal Thickness range (1.5mm to 14mm) PQR 01base metal thickness(7mm)

2. I have WPS02 for SMAW material P1 (no PWHT & impact) base metal Thickness range (5mm to 48mm) PQR 02base metal thickness(24mm)

Know I want to make anther WPS 03 using PQR01 & PQR02 is it possible as per ASME section IX.

ASME-IX QW200.4(b) to combine of processes, PQR for a process recording a test coupon that was at least 13mm?

Q1: to combine PQRS we required at least 13mm for each PQR or One PQR ?

Q2:If One PQR what is the thickness range ?  I can prepare WPS03 base metal thickness range 1.5 mm to 14mm [GTAW (3mm deposit)+SMAW(11mm deposit)]

 

Please give me guidelines to prepare WPS03

 

Regards

A V Rao

QA/QC inspector

Petrol Steel

KSA

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...