Can any one provide weld parameters for welding SA312 UNS31254 pipe witrh SA182 F44 Material using ERNiCrMo3 and ENiCrMo3 consumables and to have NACE MR0175 Hardness requirement.Most urgent.
Advance Thanks
Gujula J Raju
On Monday, January 2, 2012 9:06:27 PM UTC+5:30, N V PRASAD wrote:
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
Advance Thanks
Gujula J Raju
On Monday, January 2, 2012 9:06:27 PM UTC+5:30, N V PRASAD wrote:
Dear All,--Can we use E NiCrMo3 for welding of SS 310. What are the pros and cons.
We have PQR for ASTM E312 S31254 material welded with ENiCrMo3. Can
we use this PQR for the support of above welding procedure as per
ASME Sec. IX.Regards
VENKAT
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
Comments