Friday, July 20, 2012

Re: [MW:14910] Inconel 625 Welding Overlay on CS material

Dear,

Please check undiluted weld metal chemical requirement for ENiCrM0-3 electrodes in ASME sec-IIC .

Regards,
VJ

On Fri, Jul 20, 2012 at 12:16 PM, Deepika Nayak <deepikanayak@hotmail.com> wrote:
Dear Groups,

Please suggest whether inconel 625 overlay requirement necessarily meet the chemical composition of Inconel 625 at the surface or only the major element need to match the requirement.

Regards,


--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...