Re: [MW:14002] B31.3 PWHT requirement P1 materials

Hi mauricio,

 

Yes PWHT is required in this case.

 

Thanks

Ravish

On Tuesday, December 20, 2011 9:06:31 AM UTC+5:30, Raghuram Bathula wrote:

Yes it is required for Thickness > 0.75" (20mm)

On Tue, Dec 20, 2011 at 4:43 AM, mauricio padilla <mauricio_padilla_f@yahoo.com> wrote:

Dear,   Please I need your Help, about ASME B31,3.   I need to know if it is required PWHT.   CASE:   Pipe A106 Grb (PN 1) wall thickness  0.844"   B31.3   Chapter V   Table 331.1.1   According to table 331.1.1 really is it necessay PWHT.   Please tell me   Is it correct?.   Best regards   Mauricio

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.