Re: [MW:13969] WELDING OF SA 240 310S

Hi! SS310 material is Nil fe rrite  and having  a tendancy of Fissures /hot crack   therefore welding is very critical  preferably you should weld with Low Heat /interpass and use smaller bead head with use of smaller dia consumables Regards   Hegde P.B. 08805593046 --- On Wed, 21/3/12, Mukesh Chaudhari <mukesh.chaudhari@orientalindia.net> wrote:   From: Mukesh Chaudhari <mukesh.chaudhari@orientalindia.net> Subject: [MW:13965] WELDING OF SA 240 310S To: materials-welding@googlegroups.com Date: Wednesday, 21 March, 2012, 6:43 PM   Hi all, We facing problem to weld SA240 310S material. We found linier indication(crack) in Radiography testing. Once the repair comes then after repair we found more liner indication.   Thanks & Regards, Mukesh Chaudhari Sr. Engineer Quality Oriental Manufacturers Private Limited A: P.C.C. Notified Area, Ranoli Station Road,  Ranoli -391 350 Baroda Gujarat India T: +91.265.223 1663/2232936 F: +91.265.223 0171 E:  mukesh.chaudhari@orientalindia.net  W: http://www.orientalmanufacturers.com     -- To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/ The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.