Re: [MW:8320] welder qualification for ASME U stamp vessel

As per my understanding, if its a Code Stamp Job, then qualification of welder must be witnessed by AI. Please feel free to correct me if I am wrong.

On Fri, Nov 19, 2010 at 12:43 PM, Priya Deshmukh <piyuwillseeu@gmail.com> wrote:

Dear Santosh,

 

Welder qualification as mentioned below is the responsibility of manufacturer. There is no need to call a Third party to witness the test. The test shall be witnessed by the manufacturer's representative. The procedure for the witness shall be as per your Quality Control manual.

 

Regards,

 

Priyanka Deshmukh.

On Wed, Nov 17, 2010 at 6:07 PM, Santosh Gaikwad <santoshcwi@gmail.com> wrote:

Dear all,
could you please give information regarding welder qualification,i am trying to qualify some new welder for ASME U stamp vessel ,do i need to call third party inspection agency for witness or just i go ahead & run the welder qualification test & get welder certificate endorsed  from AI.

kind regards

Santosh

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
Priyanka Deshmukh,
Quality Control Engineer,
Transparent Energy Systems Pvt. Ltd.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
Arnab Bakshi
Welding Engineer,
APIL Durgapur

(Alumnus)Dept. of Metallurgical and Materials Engg
NIT Durgapur

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.