[MW:8388] Suitable welding electrode for 42CrMo4 V material (DIN 1.7225 / SAE 4140)

Dear members,

One of my firend need help for selection of Suitable welding electrode for 42CrMo4 V material (DIN 1.7225 / SAE 4140) and preparation of WPS/PQR

Please share your ideas

Warm Regards

Bharat B. Gole

 

 

Dear Sir

As discussed forwarding the related information for selecting the suitable welding electrode on repair welding of 42CrMo4 V material (DIN 1.7225 / SAE 4140).

The chemical properties are :

C        041-0.45,
Si        0.15-040,
Mn        0.6-0.80,
P        0.025 max,
S        0.08-0.020 ,
Cr        0.90-1.20,
Mo        0.15-0.30
Cu        0.30 max

0.2 5 Ys         680 N/mm2
UTS                850 N/mm2
% Elongation        13 min
Reduction in Area  52 min
Hardness        270-310 HB
Impact at -20 deg celcius        Avg 35 J min.

Request you to suggest a suitable welding electrode for this material.

Thanking you,        

Rothe Erde India Pvt. Ltd.

Pravin S. Dumbare

Quality assurance Dept.

Gat No. 429, Village Wadivarhe, Post Gonde,

Taluka Igatpuri, Dist Nashik - 422 403, Maharashtra, India.

Phone  : +91 02553 302341

Fax       : +91 02553 225613

Mobile  :  +91 98819 47899

Mail to   : pravin.dumbare@thyssenkrupp.com

Internet : http://www.rotheerde.com/

Disclaimer As you are aware, messages sent by e-mail can be manipulated by third parties.  For this reason our e-mail messages are generally not legally binding. This electronic message (including any attachments) contains confidential information and may be privileged or otherwise protected from disclosure.  The information is intended to be for the use of the intended addressee only.  Please be aware that any disclosure, copy, distribution or use of the contents of this message is prohibited.  If you have received this e-mail in error please notify me immediately by reply e-mail and delete this message and any attachments from your system.  Thank you for your cooperation.