Dear,
you need all 6 PTC 's to qualify the production weld of LS & CS joints of vessels.
175, R.Kesavamoorthi,
Principal surveyor,
Quest (pvt.) Ltd.,
Ranipet.
From: asad azmi <azmiasadayub@gmail.com>
To: materials-welding@googlegroups.com
Cc:
Sent: Friday, 26 November, 2010 4:30:01 PM
Subject: [MW:8391] production test coupon requiorement as per ASME SEC VIII DIV 1
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
To: materials-welding@googlegroups.com
Cc:
Sent: Friday, 26 November, 2010 4:30:01 PM
Subject: [MW:8391] production test coupon requiorement as per ASME SEC VIII DIV 1
Dear all,
Greetings.
Please inform me PTC(Production test coupon requirement) for below details--
Construction Code : ASME SEC VIII DIV 1
Shell Material : SA 387 GR 12 CL 2, 65 & 70 Thk.
MDMT : 0 Deg Celcius
Impact test is required as per ASME SEC VIII DIV 1.
The Heat number for shell material for 3 vessels is not same.
3 vessels are required to be fabricated as per the above requirement for single client. The vessels are going to to be erected at one location only.
The thichkness of shell material for 1 vessel is 65 Thk and for other 2 vessels is 70 Thk. Diameter and Length of the vessel is different. Only MDMT and material is same.
Please inform me whether seprate PTC( production test coupon) is required for each vessel OR 1 PTC attached with longseam/Circ. Seam of only 1 vessel will also represent other 2 vessels also.
Whether 2 PTC ( 1 for longseam & 1 for circumferential seam for 1 vessel) is enough for all three vessels OR total of 6 PTC are required for 3 vessels.
Please give code reference.
Thanks in advance for your valuable suggestions.
Regards
Asad Azmi
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment