[MW:4816] RE: 4809] Impact requirement for non pressure parts.

Yes - impact qualified WPS & PQR required, ASME Section IX supplementary essential variables apply.

 

UCS-67(a)  Welds made with filler metal shall be impact tested in accordance with UG-84 when any of the following apply:

     UCS-67(a)(1) when either base metal is required to be impact tested by the rule of this Division

 

John

---

From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of PAMULA
Sent: Tuesday, April 13, 2010 6:33 AM
To: materials-welding@googlegroups.com
Subject: [MW:4809] Impact requirement for non pressure parts.

Dear all,

Is it required to use Impact tested Welding procedure WPS
( supported by Impact tested PQR) to weld vessel internal Parts?

I.e parts that are directly welded on shell/head(non pressure joints).

Vessel is ASME code stamped, Shell & heads base meterials require impact testing as per code.

can any body give code referances (ASME Sec.VIII Div.1/Div.II.

regards
P.Rao

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.