DEAR ;
IN MY VIEW IT IS REQUIRED.
On Wed, 26 Aug 2020 at 09:47, K K <karan.hbl@gmail.com> wrote:
Dear Experts,Impact testing requirements for Equipment Anchor Chair to top plate/wash welding, base plate, and plug welding.According to ASME B31.3 above 25mm impact test required.So for that, I have restricted to my thickness range 5.00mm to 25.4 mm in WPS.But Now my requirements for welding Equipment Anchor Chair to top plate/wash welding, base plate, and plug welding. up to 32.88 mm,For the 32.88 mm thickness, I have to conduct an impact test or not required impact testProcess - SMAW.P No - P1.Gr.No- 1 to P1 Gr,1/2Thickness range - 5.00 mm to 32.88 mm.Material - ASTM 516 Gr.60 to ASTM Gr.70As per ASME Sec IX Ed. 2019, ASME Sec VIII, Div-1, and API RP 582according to mentioned code required Impact test or not?Thanks in advanceRegardsKK--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/b8875b6c-08f8-4701-9b20-518206a2b1een%40googlegroups.com.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CA%2BQ29Oh5C4Z2CaW%2Bcubdih_HOnMgNfQ2pr6Lng7jE_Z%3DqZ2jPg%40mail.gmail.com.
No comments:
Post a Comment