specified thickness. ref iso 15614-1
THANKS & BEST REGARDS,
KG.PANDITHAN, BE, IWE, CSWIP 3.1,
ISO 9712 Level 2 in VT,
ASNT-Level II in PT,MT,RT & UT,
LA ISO 9001-2015,
International Welding Engineer.
CONSULTANT-WELDING & QUALITY
Mobile no: +919940739349
On Mon, Aug 17, 2020 at 9:56 AM Vishwas Keskar Welding Manager WELDING <vvkeskar123@gmail.com> wrote:
Specified thickness of the Pipe is 12.7 mmActual thickness measured is 13mmClient specified preheating for 12.7 mm (=/>) =75 Deg CIs preheating is to be decided on specified thickness or actual thickness?Any Construction Code back up >--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/23337554-0c50-46b4-911c-5fdac2322672n%40googlegroups.com.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAJzm4eM1wbOsLdH5M51nQ88fs7dEoGzXMQCs-oCKo9dK7-_NYQ%40mail.gmail.com.
No comments:
Post a Comment