Re: [MW:31259] UTS from hardness

You can Refer Astm A 370 _68..however it has limitations and  is not applicable for all materials..it shows approx.values.

Need to conduct Tensile test for reliable value of tensile strength. 

Rgrds

On Sun, 2 Aug 2020, 15:59 Priya Deshmukh, <piyuwillseeu@gmail.com> wrote:

Hello All, 

I've measured hardness for my job using portable hardness tested in BHN. Can I calculate UTS of the job from the hardness values.

Thanks in advance, 

Priyanka Deshmukh. 

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAFwED4XJ4op__Cu3yGm5r5P4%3D9jg2ggXSR1ZK6y9LwUeawrMkQ%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAAT7JJgAgPCWCR0nTRJTZ5CshkkJjBkSePLxF4T6JoJBcr%2BTkQ%40mail.gmail.com.