Re: [MW:31289] Ground flush on weld seam required at intersection location

its a pleasure of mine if you show refference of this theory.

which code of construction you are using?

On Thu, 6 Aug 2020, 10:58 am 'Dinesh' via Materials & Welding, <materials-welding@googlegroups.com> wrote:

Dear experts,

Generally, standards say that "The weld seam shall be ground flush for a distance 50 mm on all sides of the intersection".

What is exact technical reason to do for ground flush on weld seam required at intersection location?

Thanks

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/d734b305-0792-4fa6-aaf5-e06f2e75bb90n%40googlegroups.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAOWr6k_NLJ2iQb3D16uuFJo8fTtDN%2BthoU-BtxN131TzJ1JY2Q%40mail.gmail.com.