Thursday, August 6, 2020

[MW:31286] Ground flush on weld seam required at intersection location

Dear experts,

Generally, standards say that "The weld seam shall be ground flush for a distance 50 mm on all sides of the intersection".

What is exact technical reason to do for ground flush on weld seam required at intersection location?

Inner side.jpg

Outer side.jpg

Thanks

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/d734b305-0792-4fa6-aaf5-e06f2e75bb90n%40googlegroups.com.

No comments:

[MW:35633] IP Joint

Hello experts, I would like to know what is IP joints in piping(31.3)?  Regards Saurabh -- https://materials-welding.blogspot.com/...