Saturday, May 23, 2020

Re: [MW:30907] Heat treatment requirement for SS310 vs SS347

what is design and operating temperature of 347 ? is it pressure application ?

Stabilizing treatment needs some in application if there is risk of  SRC

similarly please let me know what is the application of 310

On Fri, May 22, 2020 at 9:53 AM Arun Nair <arunnair.mundakkal@gmail.com> wrote:
Hello,
 Weld joint between SS310  to SS347 kindly advice about heat treatment require or not? Either pre or post.

ArunNair

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAM8%3Dvxqa%2BZJyP4_idWdODyDJCK27L2VO1EPvGdgqtbN%2Bikxqdw%40mail.gmail.com.


--
Regards

Kural

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CABhoKTBgQvuxUdU%2B-5byBwCL5Q2pcsZVw701KMvxqBix%2Bem2cQ%40mail.gmail.com.

No comments:

Re: [MW:35289] Welding consumable for S355J2WP material

S355 J2 WP  is a weathering structural steel  It has better atmospheric corrosion resistance. Use E 8018 - W1/W2  Electrodes This is regular...