Saturday, May 23, 2020

Re: [MW:30907] AWS D1.1 -Combination of welding process

Dear Chintan,
Yes, you can use this WPS for any one welding process also within the qualification ranges of that particular process.

Thanks,
Regards,
Rajnish Dixit
On Wednesday, 20 May, 2020, 10:32:35 pm GMT+7, Chintan Raval <chintan51@gmail.com> wrote:


Dear all 
Kindly advice 
I have WPS for weld process fcaw + saw as per aws d1.1 

I want to use same wps for only FCAW process as saw is not feasible for few joints.

Is this allowed as per aws d1.1 or new pqr is required for single process.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAOdsS43qnrwOjNUDrkcjGozo42GT7AMERLLxmpvPieJ6ZbH0yw%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/1485215300.2498535.1590207623827%40mail.yahoo.com.

No comments:

Re: [MW:35289] Welding consumable for S355J2WP material

S355 J2 WP  is a weathering structural steel  It has better atmospheric corrosion resistance. Use E 8018 - W1/W2  Electrodes This is regular...