Re: [MW:30901] AWS D1.1 -Combination of welding process

You can make SMAW root pass and complete welding with FCAW

Regards 

HA 

On Wed, 20 May 2020, 7:32 pm Chintan Raval, <chintan51@gmail.com> wrote:

Dear all 

Kindly advice 

I have WPS for weld process fcaw + saw as per aws d1.1 

I want to use same wps for only FCAW process as saw is not feasible for few joints.

Is this allowed as per aws d1.1 or new pqr is required for single process.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAOdsS43qnrwOjNUDrkcjGozo42GT7AMERLLxmpvPieJ6ZbH0yw%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAKOkEzeD37-gimBOAk%2BgeArVr%2BbS7-ABdo9ALOvz7%2BjQSnb%2Bsw%40mail.gmail.com.