Check if this discussion in the links can help you:
El mié., 27 may. 2020 a las 10:22, Prasad (<prasadloke27@gmail.com>) escribió:
--Dear Expert need your opinion.I have WPS/PQR of dissimilar metal GTAW (F11 to SS316L) with Inconel Filler for high temperature application. Inconel filler selected according to API 582 guidelines..but our end user is not accepting Inconel filler because it doesn't have Moly content which is present in base metal.Any document or write to prove correctness of Inconel filler?
On Tuesday, September 20, 2016 at 11:12:09 AM UTC+5:30, vijay Katkar wrote:Dear Expert,Need your guidance,I have PQR with P1 to P43 with 10 mm thickness,Can i use this PQR for Joint with 10 mm (P1) & 45 mm (P43) under following clause?Clause no QW 202.4.Thank youVijay Katkar
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/1db890c8-5cc2-4bae-b53a-ab54a0ee014e%40googlegroups.com.
Ing. José Juan Jiménez Alejandro
Independent Consultant in Parts
and Pressure Equipment
SSI-TPI
Móvil +52 1 812 352 4606
Skype: jjjimeneza
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAO5ZurL0M04YhzyNneKB5FK%3DwfU%3DiqHYdR2FaX04vvtSbK9KNA%40mail.gmail.com.
Comments